Pellet Stove Furnace
Pellet stoves are available as freestanding units or fireplace inserts that can give your home the look of an authentic fireplace with wood burning. These stoves are available in freestanding models as well as fireplace inserts. They can provide the appearance of an old-fashioned wood-burning fireplace.
The auger moves pellets from the hopper into the combustion chamber in the combustion chamber, where they are burned and generate heat. Sensors detect the flame and adjust the speed of operation to maintain the desired temperature of the room.
1. Energy Efficiency
Pellet stoves burn renewable non-toxic fuel composed of compressed sawdust wood chips, bark and other materials that are normally put in landfills, but can be turned into an efficient and clean source of heating. They help homeowners reduce their energy consumption, and consequently greenhouse gas emissions. Many users of pellet stoves say that they have recouped their initial investment in just few years by reducing their heating costs.
Pellets are stronger and more compressed than natural wood, making them more efficient in burning. They also produce less creosote than traditional wood-burning fires. Furthermore, they are stored in plastic bags to stop moisture from entering and require less frequent cleaning.
Pellet stoves, as with other heating systems need to be properly sized and vented. A skilled technician can assess your venting requirements and space to ensure the most efficient results.
When the hearth is installed, it is built to size and the vent is inserted through a hole that has been cut in your home's siding. The vent can be placed on either a side wall or the roof, based on your preference and the local regulations.
Once the vent and hearth are completed then the pellet stove can be connected and turned on. Some manufacturers provide an electronic remote control that makes it easy to start and keep the fire going, while other manufacturers offer additional sensors that monitor airflow and combustion, flue temperatures, and pressure. When the system detects it needs more or less pellets, it tells the auger to speed up or slow down accordingly.
All stoves have a storage container that can hold between 35 and 130 pounds of pellets. The size of the hopper will determine how often you need to refill your stove. Larger hoppers permit longer periods before refills is needed. A grille draws air from the room, then passes it through the heat exchanger and then blows heated air in the living area through convection. A grate or auger spreads the pellets, and an under-sink pan collects any unburnt ones, along with the combustion residue.
Although pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electric heaters. Electric components that drive motorized components of stoves require a power source. This could cause an issue in the event of power outage, though backup systems like generators and batteries are available.
2. Low Maintenance
Pellet stoves are extremely efficient, however, like any major heating appliance they require a bit of maintenance to ensure that they function properly. Cleaning regularly the exhaust vent of your stove and the stove will help prevent the build-up of harmful creosote, which can cause an explosion, fire or damage to your home or stove.
A pellet stove uses compressed natural particles (such as nutshells, kernels of corn or tiny pieces of scrapwood) made from wood or other substances. The pellets are inserted into the combustion chamber through an auger powered with electricity. The speed at which pellets are pumped into the burner is controlled by the thermostat you set. This allows the fire to keep roaring or lower and even stop depending on your set temperature. The ash will be collected in an empty ash tin underneath the burner. It is easily removed and then disposed.
Pellets are created from the waste products from lumber processing that would otherwise be thrown away. They are a sustainable source and emit less particles than traditional wood-burning appliances making them a cleaner heating source. The amount of carbon monoxide, carcinogens and other harmful chemicals that are released from pellet stoves is much lower than the newer EPA certified wood stoves.
These stoves aren't required to be vented through chimneys, as is the case with traditional wood stoves. Instead, they should be vented through a wall or any other exterior structure. Pellet stoves have flue ports that are open from the rear or the top of the appliance and are connected to an exhaust pipe that extends outside the home.
One disadvantage of pellet stoves is that you have to purchase or store enough pellets to last through the winter time. On average, homeowners of a pellet stove use three tons of pellets during the course of winter, at a cost of $200 for each ton. These costs will increase over time however, it's less expensive than buying and transporting firewood for traditional fireplaces or stove. You should buy enough pellets so that your stove will run throughout the winter's coldest months. Also, you'll need to have a place to keep the pellets (preferably cool and dry).
3. Reduced Carbon Footprint
Pellet stoves generate heat from renewable biomass fuel, reducing the need for finite fossil fuels. This contributes to a reduced carbon footprint and also helps diversify energy sources in homes.
The emissions from pellet stoves are considerably lower than wood stoves, and even the latest stoves that are EPA-certified. The emissions from pellet stoves also are considerably lower than ones from gas furnaces. Pellets can be made from sawdust, bark, and other lumber fragments. They may also contain soybeans, corn, or agricultural waste. When they are burned, they emit less particulates, which can cause respiratory problems and allergic reactions, carcinogens and nitrous dioxide.
The feed system is the primary difference between a pellet stove and a wood stove. Pellet stoves come with hoppers that contain the pellets. When the thermostat or sensors indicate that the room is in need of heating, the auger turns and the pellets are fed into the combustion chamber where they burn and generate heat. The air from the combustion chamber moves through a heat exchanger that transfers the heat to a blower and then out into the room. This process results in low emissions and no creosote accumulation.
After the hopper has been emptied, the ash is removed using a cyclone and it is then deposited into an ash container. The stove is fitted with a fan that circulates warm, fresh air into the room. The majority of pellet stoves require little maintenance and have a large viewing area for you and your family members to enjoy the flames.
The most significant factor affecting emissions from stoves made of pellets is the quality of the pellets. Poor-quality pellets will produce more emissions. When choosing your pellets, ensure that they're certified to meet specific standards and don't contain other ingredients, such as petroleum products or urea. Also, look for a manufacturer who offers a warranty and will repair or replace parts in case of a problem. If Additional Info want to take an even greener approach certain states permit homeowners to claim a tax deduction for installing pellet stoves. This is a great way to to offset the initial cost of this kind of stove and make it easier to install.
4. Reduced Noise
Pellet stoves produce very little smoke and emissions in comparison to wood burning fireplaces. They also use an electric fan to distribute heat more evenly throughout the room. This feature is one reason pellet stoves need less maintenance than wood stoves. While wood stoves require frequent cleaning of particulates and chemicals to avoid deterioration, pellet stoves can be cleaned by an electric vacuum cleaner.
Many manufacturers have made an effort to design their stoves to be easy to install and to operate as well as maintain. They also make their appliances in a variety of styles that will match your home's decor. Some models include a programmable thermostat, remote control and WIFI apps that let you monitor and manage your stove from any location in the world.
Most pellet stoves come with an enormous fuel hopper that can accommodate between 35 and 130 pounds of pellets. The pellets are then fed into the combustion chamber by an auger. The output of heat and how hot the fire is will depend on the speed at which the pellets are fed to the burner. The hopper can either be filled with hardwood pellets, composed of dense wood species such as oak and hickory or softwood pellets. Many stoves are able to use biomass pellets made of corn and switchgrass. This is a green alternative.
Because pellet stoves burn such a clean fuel, they emit less smoke than conventional wood-burning fireplaces and require less maintenance. They do not need chimneys and are a better option for retrofits or new construction.
In contrast to wood stoves, which require regular maintenance to be free of creosote as well as other chemicals, pellet stoves require periodic inspections to ensure proper operation and maintenance. This could include periodic cleaning and inspection of the ash or "clinker" as well as the fans and motors, depending on the model. The dealer of your appliance can explain the correct procedures for the specific model and brand. He can also provide you with information about storage and safety and help you find the right fuel for your stove.